Looking for a fast way to attach and detach your sheath? This carabiner allows you to rapidly snap the sheath onto a loop on your pack, or a pants belt loop. This carabiner also has a lock for added security.
**A note on using this on pants belt loops. Be sure to inspect your pants belt loops and make sure they are stitched well, and in good shape. You dont want to loose your sheath because your cheap pant's belt loop came stitched. Most rugged outdoor pants have reinforced belt loops. If you are using pants that do not have reinforced belt loops than I'd consider using the leather loop option that we sell, or reinforcing the specific pants belt loop your intend to use with this.
- Made from 9-10oz Wickett & Craig Leather
- .125" Thick Molded Kydex
- Black Oxide Fasteners
These adapters will fit the following factory sheaths -
SURVIVE! GSO4.1 Gen 1 & Gen 2
SURVIVE! GSO3.5 Gen 1
Carothers Field Knife
SURVIVE! GSO5 Gen. 1
SURVIVE! GSO5.1 Gen 1 & Gen. 2
SURVIVE! GSO6 Gen. 1
SURVIVE! GSO7/7 Gen. 1
ESEE Laser Strike
This is a blank adapter without mounting holes. Line up your eyelet mounting holes, mark your holes and drill them out. Maximum mounting hole width (center to center of eyelets) is 2.875".
Mounting hole widths on each adapter(center to center on 7/32" diameter chicago screws)
Small: 1.8" - 2.15"
Medium: 2.15" - 2.45"
These measurements are the minimum to maximum mounting hole width.