THIS KNIFE SHEATH MODEL HAS BEEN DISCONTINUED
Scout/Cross Draw Carry
This sheath is designed to be carried horizontally on your belt, either Scout Carry or Cross Draw. Scout Carry is referred to as carrying the sheath at the small of your back, while Cross Draw is carrying the sheath on the front of your belt.
PRS Collar Retention
PRS stands for Pivoting Retention Strap. This design feature allows you to pivot the retention strap downward once it is unsnapped, so it is out of the way of the knife edge when drawing the knife.
This sheath is designed to be ambidextrous. Simply unscrew the straps and retention collar from the sheath, and flip them over to the opposite side. We just ask which Draw Side in the options above so that your sheath will arrive already setup the way you want.
Made from Premium Wickett & Craig Saddle Skirting Leather
Each sheath is made from Wickett & Craig's Grade A, 9-10oz, Vegetable Tanned, Saddle Skirting Leather. We chose this leather as it is firm, yet workable, has a rich depth of color, and develops a beautiful patina with character throughout its life.
We stand behind all of our Craftsmanship and Materials. We guarantee that our product's stitches will stay stitched, rivets will stay riveted, and snaps will continue to function for the life of the product. Should you manage to cut your retention strap, we will replace it for you. The retention strap and kydex collar are both covered under our Lifetime Guarantee.
Vertical Carry Option
Each of our Scout Sheaths has the ability to be converted to Vertical Carry using our Vertical Carry Conversion. The conversion piece mounts to the back of the sheath, and still allows the belt straps and pouch to remain attached to the sheath. This sheath uses Vertical Carry Conversion Size 3.
Water Resistant Wax Treatment
Each of our sheaths is waxed inside and out with a Beeswax based Leather Conditioner. We apply this Leather Conditioner with heat, which liquefies the wax so it penetrates deep into the leather fibers. Our wax treatment in the interior of the sheath ensures that moisture will not be trapped within the sheath, to avoid the chance of rust forming on your blade.
High Quality Snaps and Hardware
We only use the best hardware for our sheaths,Black Oxide Steel Chicago Screw Hardware and DOT Scovill Mil-Spec Button Snaps.
The belt loop spacing of this sheath is compatible with standard MOLLE/PALS webbing. Horizontal Mounting Only.
This allows you to carry a firesteel on your sheath. Available in 3 sizes: 1/4", 5/16", 3/8". These sizes refer to the diameter of the firesteel rod. Firesteel is sold separately.