This page is for the individual adapters offered on these pages-
This is for the kydex adapter, and sheath mounting hardware only. If you need the hardware to mount a belt loop to the kydex adapter, please select "Yes" on the selection above.
If you ordered a sheath adapter and belt loop set from us in the past, and had chosen "Both Belt Loops", then you may have only received one set of hardware to use when swapping each belt loop. If you want to use that second belt loop with another adapter, you will need the Belt Loop Hardware.
Pancake Adapter Sizing
To find the correct adapter for your sheath, locate the eyelets on your sheath in which you want to attach the adapter, and measure the distance from Center to Center of the eyelets (see image above). This measurement is for the 2 slotted mounting holes on the bottom of the kydex adapter.Extra Small Adapter - 1.43" to 1.8" (36mm to 46mm)Small Adapter - 1.8" to 2.15" (45mm to 54mm)Medium Adapter - 2.15" to 2.45" (54mm to 62mm)Large Adapter - 2.45" to 2.68" (62mm to 68mm)Extra Large Adapter - 2.625" to 3.00" (66mm to 76mm) Taco Adapter SizingWe only offer one size of Taco Adapter. The slots in the adapter will accommodate up to a 1" spacing between eyelets on your kydex sheath.
Threadlocker is recommended for the hardware. You can purchase some here - Loctite 242 (Blue) ThreadlockerESEE Factory Knife Sheath Size Reference for Pancake Sheath Adapters
Extra Small:IzulaCandiruXancudoSmall:ESEE3ESEE3HMESEE4ESEE4HMMedium:ESEE5ESEE6ESEE6HMLaser StrikeCM6Large:JunglasJunglas II
NOTE: If your knife is not listed here, than we do not know what adapter would fit your sheath. You will need to measure your sheath to get the proper size.